Thermostat

April 26, 2020 55

This article describes the thermostat replacement procedure. A new thermostat is due if the engine temperature fails to rise in a timely manner or drops below 85C degrees while driving.

It is an easy job for the DIY enthusiast and the following parts are needed.

Thermostat (AR Part No : 60557407/60591817)
Intake manifold upper gaskets (AR Part No : 60524717)
17 mm socket for draining engine coolant
flat screwdrivers
A suitable container to drain coolant
New coolant (4 liters plus 4 liters distilled water)
Lifting jack and support stands

Thermostat

Intake manifold/plenum in place.

View from top.

Corrugated sleeve, hoses & pipes and intake manifold nuts have all been correctly restored

Vacuum hose in place.

More vacuum hoses in place.

Fill in the cooling system with coolant (50-50 mix)

Start the engine, check for leaks and let it run to normal running temperature.
Enjoy the sauna heater!