Brake Pads

April 29, 2020 32

This article describes the process of replacing the front brake pads. The brake warning check light comes on when the brake pads have reached the end of their service life and it is a really easy job to do for the DIY enthusiast.

Required parts

Brake pads set
Wrenches 13mm & 15 mm
Small piece of wood block
Caliper tool
Moly grease (CV joints grease)

Brake Pads

While the vehicle is…

These are the brake …

Wheel is removed.

Note that the pads s…

Brake pads retaining…

Disconnect the brake…

Loosen the brake flu…

Remove the bleeder r…

Remove the cable fro…

Pull the cable throu…

Cable is out.

Place the 15 mm wren…

View from below.

These are the screws…

Choose the hanging m…